Manual packaging tool
SANSTRAP strap applicator
A lightweight aluminium frame for placing a banding (Sanstrap) strap onto boxes on a pallet or line depot. The strap is stretched over the frame's arms, the frame is laid onto a layer of boxes, and pressing the trigger lever releases the strap to wrap around the boxes – in one movement, by one operator, without tools or power.
- Alu EN AW-6060 T66
- No drive
- 1 operator
- In use at Krka since 2016
Use in 5 steps
-
01Pull the tensioning lever until the lock clicks – the strap arms open.
-
02The latch mechanism holds the arms in the open position.
-
03Fit the banding strap onto the arms.
-
04Lay the frame onto the boxes so that both spacers touch the front side, and press the trigger lever.
-
05The spring moves the arms aside, the strap wraps around the boxes – lift the frame off.
Technical data
- Dimensions
- 1216 × 970 × 379 mm
- Inner width
- 906 mm
- Drive
- manual, spring-loaded
- Frame
- alu tubes 20×20×2, Ø16, Ø20, Ø25
- Bushings
- alu 25/25 (4×), sliding bushings
- Handles
- PVC, 2 + 1
- Fasteners
- stainless steel A2
Materials and cleaning
- Alu profiles EN AW-6060 T66 (AlMgSi0.5)
- Extruded alu bar EN 755-3
- PVC handles and wheels
- Steel / stainless steel: screws, nuts, washers, springs
Clean with ordinary detergents suitable for the materials listed.
Terms
- Warranty
- 1 year from handover
- Service
- 3 years after the warranty ends (charged)
- Delivery time
- 3–5 days after order
- Delivered
- assembled and tested, with serial number, warranty certificate and documentation (instructions, drawing, dimensions, bill of materials)
2016–2020 Delivered to Krka
Proven design. Krka has been using the applicators since 2016 (series 2016, 2017 and 2019/2020). The current version is 2019/2020. The device is a hand tool without its own drive and is not subject to the Machinery Directive 2006/42/EC.